FT6031 Earth Tester

IP67 Dustproof and Waterproof Ground Resistance Tester

$627.92
RRP $754.60
SAVE $126.68 (17%)
In Stock


Calculate Shipping



Standard Shipping - $0.00

Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole ground resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.

 

Key Features

• IP67 protected – top of the industry

• Test all ground types from Class A to Class D with a single meter

• Wide 0 to 2000Ω measurement range

• Minimize cabling time with innovative earthing rods and cable winder

 

 

Measurement system Switchable between two- and three- electrode methods
Measurement range 20 Ω (0 to 20.00 Ω) 200 Ω (0 to 200.0 Ω) 2000 Ω (0 to 2000 Ω)
Accuracy ±1.5 %rdg. ±8 dgt. ±1.5 %rdg. ±4 dgt. ±1.5 %rdg. ±4 dgt.
Earth voltage 0 to 30.0 Vrms, Accuracy: ±2.3 %rdg. ±8 dgt. (50/60 Hz), ±1.3 %rdg. ±4 dgt. (DC)
Dustproof and waterproof IP65/IP67 (EN60529)
Power supply LR6 Alkaline battery ×4
Possible number of measurements: 100 times 
(measurement conditions: three-electrode method, measuring 10 Ω)
Dimensions and mass 185 mm (7.28 in)W × 111 mm (4.37 in)H × 44 mm (1.73 in)D, 570 g (20.1 oz)
(including protector and batteries)
Accessories Auxiliary earthing rod L9840 (2 piece set) ×1, Measurement cable (black 4 m) L9841 ×1, Measurement cable (yellow 10 m, equipped with winder) L9842-11 ×1, Measurement cable (red 20 m, equipped with winder) L9842-22 ×1, Carrying case C0106 ×1, Protector ×1, LR6 Alkaline battery ×4, Instruction manual ×1

 

Dustproof and waterproof enclosure for robust performance in the field

IP67 dustproof and waterproof Since the FT6031’s enclosure is designed to keep out dust, it can be used with peace of mind in settings where it would be exposed to mud and dust. And if the instrument gets dirty, it can be rinsed clean with water.

 

 

Using a grounding resistance meter: Two- and three-pole methods

You can select from two grounding resistance measurement methods (two-pole or three-pole). The instrument switches the internal connection automatically when the selection key is pressed, so there’s no need to connect a short bar or other fixture. Three-pole method: Measure grounding resistance after inserting supplemental grounding rods into the ground. Two-pole method: Measure grounding resistance using the Class B ground of a pole-mounted transformer.

 

 

 

 

 

 

 

 

Dramatically faster measurement setup thanks to superior ease of use and digital operation

The FT6031’s supplemental grounding rods are thinner than previous products, making it easier to insert them into, and remove them from, the ground. The rods are made of rigid, corrosion-resistance stainless steel. In addition, the allowable resistance of the supplemental grounding electrodes has been increased by a factor of 10. This enhancement eliminates the inconvenience of setting and resetting the rods over and over again when the allowable resistance is exceeded, for example in dry soil conditions.

 

 

 

 

 

 

Digital grounding resistance meter featuring easy operation

The FT6031 is extremely easy to operate: just press the MEASURE key. The instrument will automatically complete the following sequence of operations: ground potential check → supplemental grounding electrode check → grounding resistance measurement. Auto-range operation eliminates the need to switch ranges since the instrument automatically selects the optimal range.

 

 

 

 

 

Newly developed cord winders keep measurement cords from getting twisted or tangled

When measuring grounding resistance, it takes time to put away the long measurement cords. Hioki’s newly developed winders can rewind cord about twice as fast as the reels used in previous products, dramatically reducing the amount of time needed to clean up after measurement.

 

(FT6031)

Measurement system Switchable between two- and three- electrode methods
Measurement range 20 Ω (0 to 20.00 Ω) 200 Ω (0 to 200.0 Ω) 2000 Ω (0 to 2000 Ω)
Accuracy ±1.5 %rdg. ±8 dgt. ±1.5 %rdg. ±4 dgt. ±1.5 %rdg. ±4 dgt.
Earth voltage 0 to 30.0 Vrms, Accuracy: ±2.3 %rdg. ±8 dgt. (50/60 Hz), ±1.3 %rdg. ±4 dgt. (DC)
Dustproof and waterproof IP65/IP67 (EN60529)
Power supply LR6 Alkaline battery ×4
Possible number of measurements: 100 times 
(measurement conditions: three-electrode method, measuring 10 Ω)
Dimensions and mass 185 mm (7.28 in)W × 111 mm (4.37 in)H × 44 mm (1.73 in)D, 570 g (20.1 oz)
(including protector and batteries)
Accessories Auxiliary earthing rod L9840 (2 piece set) ×1, Measurement cable (black 4 m) L9841 ×1, Measurement cable (yellow 10 m, equipped with winder) L9842-11 ×1, Measurement cable (red 20 m, equipped with winder) L9842-22 ×1, Carrying case C0106 ×1, Protector ×1, LR6 Alkaline battery ×4, Instruction manual ×1
SKU FT6031
Brand Hioki
Shipping Weight 0.5700kg

Be The First To Review This Product!

Help other Test Equipment Online users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend


9050 - Earth Nets (Set of Two)

9050 - Earth Nets (Set of Two)

$221.20

7% OFF RRP $237.60
L9787 - TEST LEAD

L9787 - TEST LEAD

$66.10

L9843-52 - MEASUREMENT CABLE

L9843-52 - MEASUREMENT CABLE

$98.00

L9844 - MEASUREMENT CABLE

L9844 - MEASUREMENT CABLE

$98.00


More From This Category


2108EL

2108EL

$128.39

50% OFF RRP $256.78
PA2105ER

PA2105ER

$179.22

50% OFF RRP $358.44
FT3151 - EARTH HiTESTER - TBC

FT3151 - EARTH HiTESTER - TBC

$526.35

35% OFF RRP $811.80
PA1807TB

PA1807TB

$39.26

50% OFF RRP $78.51
FT6380 - CLAMP ON EARTH TESTER

FT6380 - CLAMP ON EARTH TESTER

$2,200.00

15% OFF RRP $2,577.30