DT4254 - PV, Power Equipment Management DMM

$378.89
RRP $541.27
SAVE $162.38 (30%)
In Stock


Calculate Shipping



Standard Shipping - $0.00

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a voltage measurement only model designed for measuring photovoltaic modules and other high-voltage targets up to 1700 V DC.

Key Features

• High-voltage measurement up to 1700 V DC

• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics

• Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics (when measuring inverter fundamental waveforms) • Connect to PC with USB communication function (optional)

• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range CAT IV 600 V, CAT III 1000 V

DC Voltage 600.0 mV to 1500 V
5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.
AC Voltage 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
AUTO AC/DCV Yes
Resistance N/A
DC Current N/A
From 4 to 20mA Percentage conversion display N/A
AC Current (use with Clamp on probes) N/A
Temperature (thermocouples) N/A
Voltage detection Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
C (capacitance) N/A
Frequency 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 % rdg. ±1 dgt.
Continuity check N/A
Diode test N/A
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

 

High-voltage measurement digital multimeter that measure up to 1700 V

The DT4254, which is part of Hioki’s DT4250 series of standard digital multimeters, is ideal for measuring photovoltaic modules and other high-voltage targets at up to 1700 V DC. ・ DC current 600.0mV / 6.000V / 60.00V / 600.0V / 1000mV / 1500V ・ Voltage detection function

 

 

 

 

 

 

 

 

 

Test no-load voltage at megasolar installations

The DT4254 can measure DC voltages up to 1700 V, enabling you to make no-load voltage inspections of megasolar installations.

 

 

 

 

 

 

 

 

Polarity detection and notification

The DT4254 can detect a load voltage in excess of -10 V and notify the operator with a red LED and beep. This feature helps prevent recording of erroneous measured values.

 

 

 

 

 

 

 

 

 

Measure output voltage on the secondary sides of inverters by eliminating harmonic components

Accurately measure the fundamental wave alone by eliminating harmonic components with the DMM’s low-pass filter function.

 

 

 

 

 

 

 

Measurement data can be downloaded to, reviewed on, and saved to a computer.

If you connect the DT4254 to a computer with the optional Communication Package DT4900-01, you can graph data stored in the instrument’s internal memory and display measurement results in real time on the computer. In addition, displayed measured values can be saved (in text format). *The computer and multimeter are electrically isolated by means of optical communications so that data can be sent without concern for electrical hazards.

 

 

 

 

 

 

 

 

 

 

True RMS measurement for accurate measurement of even distorted current waveforms

Digital multimeters implement two types of measurement: mean-value measurement and true RMS measurement. The two methods yield significantly different measurement results for current waveforms, which are often distorted. For accurate measurement, it is necessary to use an instrument with true RMS capability.

 

 

 

 

 

 

Designed and manufactured in Japan to ensure high quality and guaranteed with a 3-year warranty for peace of mind

All development, design, and manufacturing processes for almost all Hioki digital multimeters are carried out at our Head Office in Nagano Prefecture. Some of the industry’s most advanced technological capabilities enable us to deliver products of the highest possible quality.

 

 

 

 

 

Safe measurement requires use of an instrument that suits the measurement location.

To ensure operators’ ability to use measuring instruments safely, IEC 61010 classifies the locations in which instruments are used into a series of safety-based measurement categories (ranging from CAT II to CAT IV). Using an instrument that does not satisfy the required safety level can lead to an electrical accident.

 
 

(DT4254)

DC Voltage 600.0 mV to 1500 V
5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.
AC Voltage 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
AUTO AC/DCV Yes
Resistance N/A
DC Current N/A
From 4 to 20mA Percentage conversion display N/A
AC Current (use with Clamp on probes) N/A
Temperature (thermocouples) N/A
Voltage detection Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
C (capacitance) N/A
Frequency 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 % rdg. ±1 dgt.
Continuity check N/A
Diode test N/A
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
SKU DT4254
Brand Hioki
Shipping Weight 0.3900kg

Be The First To Review This Product!

Help other Test Equipment Online users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend


L4931 EXTENSION CABLE SET

L4931 EXTENSION CABLE SET

$44.32

CARRYING CASE 3853

CARRYING CASE 3853

$29.55

8% OFF RRP $32.00
CARRYING CASE C0201

CARRYING CASE C0201

$73.61

CARRYING CASE C0202

CARRYING CASE C0202

$88.39

COMMUNICATION PACKAGE (USB) DT4900-01
50% OFF RRP $103.11
MAGNETIC STRAP Z5020

MAGNETIC STRAP Z5020

$73.61

32% OFF RRP $107.80

Others Also Bought


DT4252 - General Use DMM

DT4252 - General Use DMM

$326.26

30% OFF RRP $465.71
DT4255 - Electrical DMM

DT4255 - Electrical DMM

$426.25

30% OFF RRP $608.92
DT4256 - General Electrical Use DMM
20% OFF RRP $437.50
CARRYING CASE 3853

CARRYING CASE 3853

$29.55

8% OFF RRP $32.00
Appa 79

Appa 79

$128.28

50% OFF RRP $256.58

More From This Category


PARAMETERS PA151

PARAMETERS PA151

$50.62

50% OFF RRP $101.24
62T - APPA Multimeter

62T - APPA Multimeter

$57.68

50% OFF RRP $115.36
DT4252 - General Use DMM

DT4252 - General Use DMM

$326.26

30% OFF RRP $465.71
DT4221 - Entry Level DMM

DT4221 - Entry Level DMM

$85.13

50% OFF RRP $170.26
A5 - APPA OPEN CLAMP MULTIMETER

A5 - APPA OPEN CLAMP MULTIMETER

$154.00

20% OFF RRP $193.00
DT4222 - Entry Level DMM

DT4222 - Entry Level DMM

$107.02

50% OFF RRP $214.04