DT4253 - HVAC & Instrumentation DMM with Temperature & Current Clamp Capabilities

$358.21
RRP $511.72
SAVE $153.51 (30%)
Sold Out


Calculate Shipping



Standard Shipping - $15.00

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1kHz bandwidth.

Key Features

• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics

• Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics

• Includes multiple measurement functions such as temperature (only for DT4253), capacitance, and frequency

• Measures large currents with optional clamp on probe (only for DT4251,DT4253)

• USB communications function supports PC measurements (optional)

• Broad -10 (14°F) to 50°C (122°F) operating temperature range CAT IV 600 V, CAT III 1000 V 

DC Voltage 600.0 mV to 1000 V
5 ranges, Basic accuracy: ±0.3 %rdg. ±5
dgt.
AC Voltage 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 %rdg. ±3
dgt. (True RMS, crest factor 3)
AUTO AC/DCV Yes
Resistance 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current 60.00 μA to 60.00 mA, 4 ranges,
Basic accuracy: ±0.8 %rdg. ±5
dgt.
From 4 to 20mA Percentage conversion display Yes
AC Current (use with Clamp on probes) 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Temperature (thermocouples) K: -40.0 to 400.0 °C , Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C
Voltage detection N/A
C (capacitance) 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.
Frequency 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 %rdg. ±1
dgt.
Continuity check Continuity threshold [ON]: 25 Ω or less , 
[OFF]: 245 Ω or more, 
Response time: 0.5 ms or more
Diode test Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, 
Threshold of forward voltage: 0.15 V to 1.5 V
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

Digital multimeter ideal for instrumentation, airconditioning equipment, and gas-burning devices

The DT4253, which is part of Hioki’s DT4250 series of standard digital multimeters, is ideal for measuring instrumentation, airconditioning equipment, and gas-burning devices. ・DC current 60.00μA / 600.0μA / 6.000mA / 60.00mA ・Temperature -40.0 to 400.0℃ ・Accepts an AC clamp sensor.

 

 

 

 

 

 

 

600.00 μA range for measuring very low currents used by gas-burning devices

Accurately measure the very low currents such as burner flame currents.

 

 

 

 

Percentage display for instrumentation signal 4 to 20 mA measurements

The instrument can convert and display instrumentation signals of 4 to 20 mA or 0 to 20 mA representing properties such as temperature, pressure, and flow rate from a transducer or other device that converts sensor data into an electrical signal.

 

 

 

 

 

 

 

 

Clamp-on sensor based current measurement eliminates the cause of accidents

Mistakenly measuring voltage using the current range may lead to a short-circuit. The DT4253 eliminates the root cause of such accidents by providing clamp-on sensor based current measurement functionality instead of using conventional probes.

 

 

 

 

Measure output voltage on the secondary sides of inverters by eliminating harmonic components

Accurately measure the fundamental wave alone by eliminating harmonic components with the DMM’s low-pass filter function.

 

 

 

 

 

 

 

Measurement data can be downloaded to, reviewed on, and saved to a computer.

If you connect the DT4253 to a computer with the optional Communication Package DT4900-01, you can graph data stored in the instrument’s internal memory and display measurement results in real time on the computer. In addition, displayed measured values can be saved (in text format). *The computer and multimeter are electrically isolated by means of optical communications so that data can be sent with peace of mind.

 

 

 

 

 

 

 

 

 

 

 

True RMS measurement for accurate measurement of even distorted current waveforms

Digital multimeters implement two types of measurement: mean-value measurement and true RMS measurement. The two methods yield significantly different measurement results for current waveforms, which are often distorted. For accurate measurement, it is necessary to use an instrument with true RMS capability.

 

 

 

Designed and manufactured in Japan to ensure high quality and guaranteed with a 3-year warranty for peace of mind

All development, design, and manufacturing processes for almost all Hioki digital multimeters are carried out at our Head Office in Nagano Prefecture. Some of the industry’s most advanced technological capabilities enable us to deliver products of the highest possible quality.

 

 

 

 

Safe measurement requires use of an instrument that suits the measurement location.

To ensure operators’ ability to use measuring instruments safely, IEC 61010 classifies the locations in which instruments are used into a series of safety-based measurement categories (ranging from CAT II to CAT IV). Using an instrument that does not satisfy the required safety level can lead to an electrical accident.

 

 

 

 

 

 

(DT4253)

DC Voltage 600.0 mV to 1000 V
5 ranges, Basic accuracy: ±0.3 %rdg. ±5
dgt.
AC Voltage 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 %rdg. ±3
dgt. (True RMS, crest factor 3)
AUTO AC/DCV Yes
Resistance 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current 60.00 μA to 60.00 mA, 4 ranges,
Basic accuracy: ±0.8 %rdg. ±5
dgt.
From 4 to 20mA Percentage conversion display Yes
AC Current (use with Clamp on probes) 10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Temperature (thermocouples) K: -40.0 to 400.0 °C , Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C
Voltage detection N/A
C (capacitance) 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.
Frequency 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 %rdg. ±1
dgt.
Continuity check Continuity threshold [ON]: 25 Ω or less , 
[OFF]: 245 Ω or more, 
Response time: 0.5 ms or more
Diode test Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, 
Threshold of forward voltage: 0.15 V to 1.5 V
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4
SKU DT4253
Brand Hioki
Shipping Weight 0.3900kg

Be The First To Review This Product!

Help other Test Equipment Online users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend


L4931 EXTENSION CABLE SET

L4931 EXTENSION CABLE SET

$44.32

CARRYING CASE 3853

CARRYING CASE 3853

$29.55

8% OFF RRP $32.00
CARRYING CASE C0201

CARRYING CASE C0201

$73.61

COMMUNICATION PACKAGE (USB) DT4900-01
50% OFF RRP $103.11
MAGNETIC STRAP Z5020

MAGNETIC STRAP Z5020

$73.61

32% OFF RRP $107.80
CLAMP ON PROBE 9018-50

CLAMP ON PROBE 9018-50

$559.07

Conversion Adapter 9704

Conversion Adapter 9704

$58.49

DT4910  THERMOCOUPLES (K) -40 to 260 °C (-40 to 500 °F)
30% OFF RRP $92.85

Others Also Bought


DT4252 - General Use DMM

DT4252 - General Use DMM

$326.26

30% OFF RRP $465.71
3280-10F - 1000A AC CLAMP METER

3280-10F - 1000A AC CLAMP METER

$165.31

4% OFF RRP $171.60
UT71A- Intelligent Digital Multimeter
50% OFF RRP $227.31
DT4221 - Entry Level DMM

DT4221 - Entry Level DMM

$85.13

50% OFF RRP $170.26
DT4222 - Entry Level DMM

DT4222 - Entry Level DMM

$107.02

50% OFF RRP $214.04
APPA 98III

APPA 98III

$143.57

50% OFF RRP $287.13
DT-9989

DT-9989

$342.78

50% OFF RRP $685.58
3RB3016­1SB0

3RB3016­1SB0

$59.80

80% OFF RRP $299.00

More From This Category


DT4222 - Entry Level DMM

DT4222 - Entry Level DMM

$107.02

50% OFF RRP $214.04
A5 - APPA OPEN CLAMP MULTIMETER

A5 - APPA OPEN CLAMP MULTIMETER

$154.00

20% OFF RRP $193.00
UT71A- Intelligent Digital Multimeter
50% OFF RRP $227.31
DT4254 - PV, Power Equipment Management DMM
30% OFF RRP $541.27
Conversion Adapter 9704

Conversion Adapter 9704

$58.49

APPA 98III

APPA 98III

$143.57

50% OFF RRP $287.13
UNI-T UT71B

UNI-T UT71B

$145.43

50% OFF RRP $290.86
PARAMETERS PA3020

PARAMETERS PA3020

$43.16

50% OFF RRP $86.31